$19 CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box) Industrial Scientific Fasteners Anchors CONFAST 1 4" x 1-1 2" Hammer Box in Indianapolis Mall Nail Anchor Drive per 100 $19 CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box) Industrial Scientific Fasteners Anchors CONFAST 1 4" x 1-1 2" Hammer Box in Indianapolis Mall Nail Anchor Drive per 100 Industrial Scientific , Fasteners , Anchors,Anchor,1-1/2",x,(100,blog.winloot.com,per,/magirologist634323.html,Hammer,in,1/4",Drive,$19,Box),CONFAST,Nail Industrial Scientific , Fasteners , Anchors,Anchor,1-1/2",x,(100,blog.winloot.com,per,/magirologist634323.html,Hammer,in,1/4",Drive,$19,Box),CONFAST,Nail

CONFAST 1 4

CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box)

$19

CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box)

|||

Product description

ApplicationsThe anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/4".Length Anchor The length of the anchor is 1-1/2"Minimum EmbedmentThe minimum anchor embedment into the concrete is 3/4". Therefore, the anchor must be installed so that a minimum of 3/4" of the anchor is embedded into the concrete.Spacing between AnchorsEach anchor must be spaced a minimum distance of 2-1/2" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 1-1/4" from an unsupported edge of the concrete.

CONFAST 1/4" x 1-1/2" Hammer Drive Nail in Anchor (100 per Box)

Back to top